Product Description

CX302V Stereo 120V Power Amp. The CX302V is designed to meet the needs of sound contractors. Featuring the PowerLight switch mode power supply and features like gain control security panels, the CX302V allows you to set it and forget it. All models feature DataPorts for integration with Q-Sys or QSControl.net systems. The CX302V is a two-channel power amp designed from the ground up, combining QSC's exclusive PowerLight technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX Series is the ideal solution to any permanently installed sound system. The CX302V provides direct 70 volt capability for distributed audio systems. It offers low impedance capability and 600 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD). It is equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers. CX amplifiers also include an HD15 Data Port connector to interface with Q-Sys and QSControl networked audio systems, for remote amplifier monitoring and control. With high output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently installed sound system. With PowerLight technology, CX amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerLight also cuts waste heat, boosts reliability and gets rid of unwanted noise and hum. PowerLight is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230,000 times a second through an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio sig...



Brand : QSC

Item model num : CX302V

MPN(PartNumber) : CX302V

EAN : 0684284000415

Product Dimensions(LxWxH) : 61x47x15cm ; 11907 g

Package Dimensions(LxWxH) : 61x47x15cm ; 11907 g







제품설명







모델명: CX302V

상품명: QSC CX-302V 2 Channel Direct Output Power Amplifier (70V)

CX302V

highlights Used Condition: 8+ Shows moderate wear or finish marks 제품 사양:



Stereo Mode (Both Channels Driven): 70 V: 200 W, 20 Hz 20 kHz, 0.05% THD 70 V: 250 W, 1 kHz, 0.05% THD 70 V: 300 W, 1 kHz, 1% THD Bridged Mono Mode: 140 V: 400 W, 20 Hz 20 kHz, 0.05% THD 140 V: 500 W, 1 kHz, 0.05% THD 140 V: 600 W, 1 kHz, 1% THD



>500



1.26 V rms @ 8 Ω



Balanced: 12 kΩ Unbalanced: 6 kΩ



10 V rms (+22 dBu)



x56.6, 35 dB



AB+B



20 Hz 20 kHz, ± 0.2 dB



20 Hz 20 kHz: > 106 dB



SMPTE IM: 1 x 3 pin EIC, power supply input 1 x 3 pin XLR female, channel 1 line input 1 x 3 pin XLR female, channel 2 line input 1 x 3 pin terminal block, channel 1 line input 1 x 3 pin terminal block, channel 2 line input 1 x 3 position barrier strip, channel 1 output 1 x 3 position barrier strip, channel 2 output 1 x 15 pin Sub D female, serial data port 1 x 3.5 mm phone jack, mono output



Front Panel: 1 x Channel 1 attenuation knob 1 x Channel 2 attenuation knob 1 x Power On/Off switch Rear Panel: 1 x 10 position DIP switch (clip limit, filters, and stereo & parallel mode settings for both channels)



1 x Power, yellow 1 x Bridge, yellow 1 x Parallel, yellow 2 x Clip, red 2 x 10 dB, green 2 x 20 dB, green 2 x Signal, green



Variable speed fan, rear to front air flow



Idle: 0.8 A 1/8 Power Pink Noise: 5.7 A @ 120 V 1/3 Power Pink Noise: 8.0 A @ 120 V



19.0 x 3.5 x 14.0" (48.3 x 8.9 x 35.6 cm)



21 lb (9.5 kg)